Panasonic VRF Condensing Units
Best efficiency ECOi series from Panasonic
Lower running and life cycle costs
Panasonic ECOi 6N systems are amongst the most efficient VRF systems on the market, offering COPs in excess of 4.0 at full load conditions. The system is also designed to make sure that we reduce the running cost of each system by using our unique road map control routine to ensure that the most efficient combination of compressors are running at any one time. Improved defrost sequencing also reduces running costs by defrosting each outdoor coil in turn when conditions allow.
The range of outdoor unit modules consists of 7 models from 8 HP to 20 HP. The module sizes from 14 HP to 20 HP can be configured for HI-COP.
Standard mode offers the highest capacity while still delivering excellent efficiency, while HI-COP mode delivers exceptional efficiency and low running costs with a slight reduction in capacity.
Up to 64 indoor units can be connected up to a capacity of 200% indexed indoor unit loads, enabling the system to be used effectively on highly diversified building loads: this large connectability feature makes it an easy-to-design solution for schools, hotels, hospitals and other large buildings. Up to 1,000 m in pipe length enables the New VRF ECOi 6N series to be used in very large buildings, with maximum design flexibility.
The ECOi 6N system is also easy to control. It has more than 8 types of control from standard wired remote controls to touch screen panels or web access interfaces.
2-Pipe Mini ECOi LE1 Series
Cooling and Heating type Single Phase
Cooling and Heating type Three Phase
For small-scale commercial and residential use Panasonic 2-Pipe Mini ECOi, the 2-pipe heat pump is specifically designed for the most demanding applications. Mini ECOi is available in 3 sizes with cooling capacities ranging from 12.1 kW to 15.5 kW and connectable up to 9 indoor units (applicable for 15.5 kW). An expansion from the Panasonic VRF line up, the Mini ECOi is compatible with the same indoor units and controls as the rest of the ECOi range.
2 Pipe ECOi
2-Pipe ECOi 6N series. High-efficiency and large-capacity VRF system
Large-capacity VRF systems using R410A with advanced technology.
Next generation VRF newly-redesigned!
At start up stage a unit can have Hi COP function selected – this lowers capacity but increases the COP. It’s your choice.
· Top class COP= 4.56 (In case of 8 HP heating)
· Heating operation at outdoor temperatures down to –25°C
· Extended pipe runs of up to 180 m
3 Pipe ECOi
3-Pipe ECOi MF2 6N Series
Simultaneous heating and cooling VRF system
The New Panasonic 3-Pipe MF2 series offers the best solution for the most demanding customers.
· The new 3-Pipe units have only one chassis size, with a very small footprint (only 0.93 m²)
· 1 body for all sizes: H1.758 x W1.000 x D930mm, for 8, 10, 12, 14 and 16 HP
· Maximum capacity size as 48 HP by 3 unit combinations (16 HP x 3 = 48 HP)
· Up to 52 indoor units connectable
· Maximun capacity ratio of 150%
Panasonic introducing the gas driven VRF
Panasonic’s GHP range is extensive and covers the 2-Pipe and 3-Pipe system. Our GHP VRF range of commercial systems is leading the industry in the development of efficient and flexible systems, and is the natural choice for commercial projects, especially those where power restrictions apply. As you would expect, all our gas-driven VRF systems have the highest reliability rates in the industry and a leading customer service programme. The torque and rpm control functions of the GHP’s motor are
comparable with an inverter-type electric air conditioner. Thus, the GHP ensures individual, and efficient control and performance – just as you expect from an electric inverter controlled air conditioner.
Easy to position
· Up to 71 kW of cooling from a current consumption of 0,1 kW/h
· Single Phase power supply across the range
· The option of natural gas or LPG as its main power source
· Embedded Water Heat Exchanger to connect to domestic hot water systems 16–25 HP (2-Pipe units only)
· Option of DX or chilled water for indoor heat exchange
· Reduced CO2 emissions
ECOi 2 Pipe with Water Heat Exchanger
ECO G WITH WATER HEAT EXCHANGER
FOR CHILLED AND HOT WATER PRODUCTION
For hydronic applications
Water Heat Exchanger, dimensions reduced by 45 % (250 W x 2 and 500 W x 2). Operation and control by timer remote control CZ-RTC4. Energy-efficient capacity control. Stainless steel plate heat exchanger with antifreeze protection control. Change-over between heating and cooling operation.