Description

• Double-skin casing with 50 mm long fibre mineral wool insulation reinforced with bonded glass fibre cloth, peripheral frame or stainless steel support legs, depending on size, two-tone galvanised steel twin-wall panels, smooth internal walls without protruding screws as required by EN 13053
• At least one removable panel per functional section as required by EN 13053, standard access panel on functional sections requiring maintenance
• Filter efficiency: G4, F6 to F9, H10 to H14 or activated carbon. International dimensions. Filter mounted on compressible runners. Stainless steel universal or large-media frame with pressure tappings on each filtration stage. Filter class F9 in accordance with EN 13053
• Lift-off doors on offset hinges, twist-lock latches made of composite materials, polyamide handles, large square inspection window as required by EN 13053
• Sloped stainless steel condensate drain pan as required by EN 13053
• Hot water or cold water coils with standard threaded connections (up to 3″) and airtight sealing flanges, thermal break between casing and tubes, electric heater
• Motor mounted on self-guided bracket, with belt idler, three types of fan (LP, MP and plug), mounted on anti-vibration frame, flexible internal connection sleeve between fan and casing
• Fitted with cable gland for electrical power supply
• Adiabatic or steam humidifier
• Damper, single air intake, two-way mixing, three-way economiser, opposing blades, leakage class of dampers ensured by gaskets at the ends of the louvres and a continuous gasket along the side
• Heat recovery unit with exchange coils, plates, heat pipe or wheel, sound attenuator
• The AIRTECH range meets the requirements for European standards EN 1886 and EN 13053 and is manufactured in CIAT’s ISO 9001 certified facilities

Range:

Available in 11 models

Range of use:

Air flow rates of 1,000 to 66,000 m³/h